Ukulele For Dummies (5 page)

Here are the rest of the ukulele's parts:

Bridge:
The bridge is attached to the front of the ukulele and holds the strings at that end. Two main types of bridge exist: one where you tie the strings to the bridge, and one where you knot the end of the string and thread it through a slit.

Saddle:
The saddle is the thin, usually white, piece that sticks up out of the bridge. The strings rest on top of the saddle, and this creates one end of the section of strings that you play.

Soundhole:
This round hole on the front of your ukulele lets the sound out. The soundhole is usually placed under the strings but not always. The placement of the soundhole doesn't particularly impact on the sound.

Neck:
The neck is the long bit that sticks out of the body. Ukulele necks are lighter and weaker than similar instruments, such as guitars and mandolins, because they're designed for nylon strings. So don't be tempted to put steel guitar strings on your uke; you'll snap the neck in two.

Fretboard:
The fretboard is the strip of wood that runs along the neck just behind the strings. When you're playing your ukulele, you press the strings down against the fretboard to produce notes. Most fretboards are made of rosewood.

Frets:
The frets are strips of metal that go vertically across the fretboard. They mark out the different pitches of the notes. The higher up the fretboard, the higher the note is musically.

Fret markers:
Fret markers are the dots on the fretboard. They make it easier for you to spot which fret is which further up the neck. Ukuleles have fret markers on the 5th, 7th and 10th frets (and also at the 12th and 15th if the fretboard extends that far).

This arrangement can be a little confusing for guitar players who pick up a ukulele, because guitars have a marker at the 9th fret rather than the 10th.

Nut:
The nut marks the end of the fretboard. The strings sit on it as they go from the fretboard to the headstock. It forms the end of the section of the strings that you play.

Headstock:
The headstock is located at the end of the fretboard and is there to hold the tuners. But its main function is as an advertising spot for the uke maker.

Tuners:
Tuners are attached to the headstock and hold the strings of the ukulele. You change the tuning of your strings by twiddling them. Two types of tuner exist:

•
Friction tuners
: Traditionally, ukuleles have friction tuners, which stick out behind the ukulele and hold the strings in tune by friction alone.