When Do Fish Sleep? (21 page)
Because climate conditions change continuously, there is no real reason to have four seasons instead of some other number. Some cultures recognize three: winter, growing, and harvest. When I lived in northern Vermont, people spoke of six: winter, mud, spring, summer, fall, and freezeup.
The automakers aren’t so concerned about
you
getting into your car. They are worried about thieves getting into your car.
Ford Motor Company, for example, now uses one key for the ignition and doors and a separate key for the glove compartment and trunk. Ford once used the same key for the door and the trunk, but changed. A Ford representative, Paul Preuss, explains:
At one time, it was a relatively easy matter for a car thief to work open a car door and make an imprint so that it was possible to produce a key that also worked the ignition. Hence, a separate ignition key. Changing from a five-cut key to the present ten-cut key accomplishes the same thing. Five of the cuts activate the door lock and a different five operate the ignition. Taking an imprint of the door lock does not provide the proper cuts for the ignition lock.
General Motors also provides a separate key for doors and ignition and explains its decision as an attempt to foil aspiring thieves.
A two-key approach also allows the car owner to stash valuables in the trunk or glove compartment while leaving only the ignition key with a parking lot attendant or valet. And if you misplace the door key? Well, there’s always the coat hanger.
Submitted by Doris Hosack of Garfield Heights, Ohio. Thanks also to Charles F. Myers of Los Altos, California; and Loretta McDonough of Frontenac, Missouri
.
P.S. News Flash. Just as this book was going to press, we received a note from the Ford Parts and Service Division. Although the company felt that separate door and ignition keys made sense for security reasons, Ford is returning to its roots: “The consumer prefers one key for both door and ignition; therefore, we will phase in one key for both in the near future
.”
What’s
the Difference Between Popcorn and Other Corn? Can Regular Corn Be Popped?
There are five different types of corn: dent, flint, pod, sweet, and popcorn. Popcorn is the only variety that will pop consistently. Gregg Hoffman, of American Popcorn, told
Imponderables
that other corn might pop on occasion but with little regularity.
The key to popcorn’s popping ability is, amazingly, water. Each popcorn kernel contains water, which most popcorn processors try to maintain at about a 13.5% level. The water is stored in a small circle of soft starch in each kernel. Surrounding the soft starch is a hard enamel-like starch. When the kernel is heated for popping, the water inside heats and begins to expand. The function of the hard starch is to resist the water as long as possible.
When the water expands with such pressure that the hard starch gives way, the water bursts out, causing the popcorn kernel to explode. The soft starch pops out, and the kernel turns inside out. The water, converted into steam, is released (fogging the eyeglasses of four-eyed popcorn makers), and the corn pops.
The other four varieties of corn are able to store water effectively. But their outer starch isn’t hard enough to withstand the water pressure of the expanding kernel, and so nothing pops.
Submitted by David Andrews of Dallas, Texas
.
What
Does It Mean When We Have 20-20 or 20-40 Vision?
The first number in your visual acuity grade is always twenty. That’s because the 20 is a reference to the distance you are standing or sitting from the eye chart. The distance is not a coincidence. Rays of light are just about parallel twenty feet from the eye chart, so that the muscle controlling the shape of the lens in a normal eye is in a state of relative rest when viewing the chart. Ideally, your eyes should be operating under optimal conditions during the eye test.
The second number represents the distance at which a normal eye should be able to see the letters on that line. The third from the bottom line on most eye charts is the 20-20 line. If you can see the letters on that line, you have 20-20 (“normal”) vision. A higher second number indicates your vision is subnormal. If you have 20-50 vision, you can discern letters that “normal” observers could see from more than twice as far away, fifty feet. If you achieve the highest score on the acuity test, a 20-10, you can spot letters that a normal person could detect only if he were 50% closer.
We also got the answer to another Imponderable we’ve always had about the vision test: Are you allowed to miss one letter on a line and still get “credit” for it? Yes, all you need to do is identify a majority of the letters on a line to get full credit for reading it. If only our schoolteachers were such easy graders.
How
Does Yeast Make Bread Rise? Why Do We Need to Knead Most Breads?
Yeast is a small plant in the fungus family (that’s ascomycetous fungi of the genus
Saccharomyces
, to you botanical nuts), and as inert as baker’s yeast might seem to you in that little packet, it is a living organism. In fact, it works a little like the Blob, feeding and expanding at will.
Yeast manufacturers isolate one healthy, tiny cell, feed it nutrients, and watch it multiply into tons of yeast. One gram of fresh yeast contains about ten billion living yeast cells, thus giving yeast the reputation as the rabbit of the plant world.
To serve the needs of bakers, manufacturers ferment the yeast to produce a more concentrated product. But the yeast isn’t satisfied to idly sit by in the fermentation containers—it wants to eat. So yeast is fed its favorite food, molasses, and continues to grow. A representative of Fleischmann’s Yeast told
Imponderables
that under ideal conditions, one culture bottle of yeast holding about two hundred grams will grow to about one hundred fifty tons in five days, enough yeast to make about ten million loaves of bread.
After it has grown to bulbous size, the yeast is separated from the molasses and water and centrifuged, washed, and either formed into cakes or dried into the granulated yeast that most consumers buy. When the baker dissolves the yeast in water, it reactivates the fungus and reawakens the yeast’s appetite as well.
Yeast loves to eat the sugar and flour in bread dough. As it combines with the sugar, fermentation takes place, converting the sugar into a combination of alcohol and carbon dioxide. The alcohol burns off in the oven, but small bubbles of carbon dioxide form in the bread and are trapped inside the dough. The carbon dioxide gas causes gluten, a natural protein fiber found in flour, to stretch and provide a structure for the rising dough without releasing the gas. When the dough doubles in size, the recommended amount, it is full of gas bubbles and therefore has a lighter consistency than breads baked without yeast.
By kneading the bread, the baker toughens the gluten protein structure in the dough, stretching the gluten sufficiently to withstand the pressure of the expanding carbon dioxide bubbles. You don’t need to knead all dough, however; for instance, batter breads, which are made with less flour and have a more open, coarse grain, don’t need it.
Submitted by Jim Albert of Cary, North Carolina
.
Why
Do Doctors Tap on Our Backs During Physical Exams?
We’ve always been suspicious about this tapping. From a patient’s point of view, it has two strong attributes: It doesn’t hurt and it doesn’t cost anything extra. But nothing ever seems to happen as a result of the tapping. No doctor has ever congratulated us on how great our back sounded or for that matter looked worried after giving us a few whacks on the back. At our most cynical, we’ve even wondered whether this is a physical examination equivalent of a placebo: The doctor gets a break from the anxious gaze of the patient, and the patient is reassured that at least the back part of his body is O.K.
Doctors insist that there is a sound reason to tap our backs. Short of an X ray, the tap is one of the best ways to collect information about the lungs. The space occupied by the lungs is filled with air. The two lungs are contained in the two pleural spaces, full of air, and lung tissue itself contains air.
Dr. Frank Davidoff, associate executive vice president, Education, for the American College of Physicians, told
Imponderables
about the fascinating history of the practice of tapping:
In 1754, a Viennese physician named Leopold Auenbrugger discovered that if you thumped the patient’s chest, it would give off a more hollow sound when you tapped over the air-filled lung space, and a more “flat” or “dull” sound if you tapped over a part of the chest that was filled with something more solid, like muscle, bone,
etc.
Auenbrugger’s father was a tavern keeper in Graz, Austria, who used to judge the amount of wine left in the casks by tapping on them—the hollow note indicating air, the flat note indicating wine.
Auenbrugger found that by thumping a patient’s chest—somewhat as his father rapped on a cask—abnormal lesions in the chest cavity, such as fluid or a solid tumor in the cavity where air-filled lung ought to be, produced a sound different from that given off in a healthy air-filled chest. Auenbrugger tested out his new method of physical diagnosis over a period of seven years of drumming on his patient’s chests, and in 1761, he put before the medical profession the result of his experiments, in a book called
New Invention to Detect by Percussion Hidden Diseases in the Chest
.
Dr. Davidoff adds that the technique used today is virtually the same as the one Auenbrugger invented more than two hundred years ago.
Dr. William Berman, of the Society for Pediatric Research, says that the technique is a good, obviously cheap alternative to an X ray and has even other attributes. Tapping on the front of the chest can determine the size of a patient’s heart, because the heart is much more solid than the lungs as it is muscular and full of blood.
Submitted by Richard Aaron of Toronto, Ontario
.
Why
Do Military Personnel Salute One Another?
Every Western military organization we know of has some form of hand salute. In every culture, it seems the inferior initiates the salute and is obligated to look directly into the face of the superior.
The origins of the hand salute are murky. In ancient Europe, where not only military officers but freemen were allowed to carry arms, the custom for men about to encounter one another was to lift their right hand to indicate they had no intention of using their sword. Many of our friendly gestures, such as tipping hats, waving, and handshaking, probably originated as ways of proving that one’s hand was not reaching for a sword or a convenient rock.
By the time of the Roman Empire, salutes were a part of formal procedure among the military. Soldiers saluted by placing their right hands up to about shoulder height with the palm out. The hand never touched the head or headgear during the salute.
In medieval times, when knights wore steel armor that covered their bodies from head to toe, two men often encountered each other on horseback. To display friendship, two knights supposedly would raise their visors, exposing their faces and identities to view. Because they held their reins in the left hand, they saluted with their right (sword) hand, an upward motion not unlike the salute of today.
Whether or not our modern salute stems from the rituals of chivalry, we know for a fact that we Americans borrowed our salute from modern British military practices. In 1796, British Admiral Earl of St. Vincent commanded that all British officers must henceforth take off their hats when receiving an order from a superior “and not to touch them with an air of negligence.” Although the British Navy made salutes compulsory, it didn’t codify the precise nature of the salute. In many cases, inferiors simply “uncovered” (doffed their caps).
The American military salute has also undergone many changes over the years. At one time, Marines didn’t necessarily salute with their right hand, but the hand farthest from the officer being saluted. Even today, there are differences among the branches. Although the Army and Air Force always salute with their right hand, Navy personnel are allowed to salute with the left hand if the right is encumbered. And while Air Force and Army men and women may salute while sitting down, Naval officers are forbidden to do so.
